Dog fence installation is easier than you might think, whether you’re setting up a physical Real Low visibility dog fence from petplaygrounds.com or an invisible fence. If you’re short on time, here’s what you need to know for a quick solution:
- Safety First: Keeps your dog safe and avoids dangers like traffic.
- Easy Installation: Kits are available; follow the basic steps.
- Training Required: Teach your dog to recognize boundaries only for electric fences, this takes time and does not protect from predators. Consider a NON-electric dog fence; they require no training or shocks and offer significantly more protection.
- Tools and Materials: Basic tools like a shovel, drill, and wire connectors.
Installing a dog fence is crucial for keeping your furry friend safe and secure. While nothing beats the reliability of a physical or low visibility Real dog fence, invisible fences offer a flexible and often more affordable alternative but at the cost of real protection and up to a 30% failure rate. As Ali Smith, a dog trainer, asserts, “Nothing works better than a physical fence to prevent your dog from wandering.” Yet, circumstances such as local codes or terrain can make invisible fences the best option.
Pet Playgrounds provides various options to suit different needs, making DIY installation accessible even for those without technical know-how. This guide aims to provide straightforward tips and tricks for installing effective dog fences, focusing on both the practical aspects and the safety benefits.
Planning Your Dog Fence Install
Mark Your Utilities and Obstacles
Before you start digging, it’s crucial to know where your underground utilities are. Simply call 811, and they will come out to mark your underground utility lines with spray paint or flags. Plan ahead, as this might take up to a week.
If you have privately-installed utilities like gas cylinders or a septic system, mark these as well. Generally, these utilities are buried over a foot deep, so hitting them is unlikely if your wire is only a few inches down. However, if your dog fence wire runs parallel to any underground lines, keep at least a 4-foot separation to avoid interference. Crossing underground lines perpendicularly is usually fine.
Also, mark the location of any low-voltage power outdoor lighting lines or sprinkler systems. If you’re unsure where these lines are, make an educated guess. You don’t want to damage a sprinkler line or low-voltage power line. Consider shutting off the water and power before you start digging if you’re uncertain about the line locations.
Principles of Design
Designing your dog fence layout involves some key principles to ensure it works effectively.
Utility Lines Should Be Crossed at Right Angles
Avoid running the boundary wire close to a utility line for long stretches. Proximity can cause your dog’s collar to activate incorrectly.
Round Your Corners
Avoid sharp 90-degree turns in your dog fence wire. Sharp corners can cause the signal to cancel out. Instead, round your corners gradually.
Establish Separation Between Parallel Dog Fence Wires
Each length of boundary wire emits a signal. If they run too close together, they will cancel each other out. Keep parallel wires at least 4 feet apart. If your neighbors also have an electric dog fence, maintain a separation of about 6-10 feet from their wires.
Diagramming Your Yard
Grab a piece of graph paper and draw a rough sketch of your property. Include buildings, sidewalks, driveways, gardens, and any marked underground utilities. This will help you figure out where you want your dog to have access and which areas should be off-limits.
Decide where to mount your transmitter box. Ideally, it should be near a power outlet and protected from the elements. The garage or a weatherproof shed with power is perfect.
Next, determine your dog fence wire layout. The fence needs to make a complete loop that starts and ends at the same location. Use twisted wire to connect your two ends of boundary wire with your transmitter. Twisted wire allows your dog to cross over it without receiving a correction.
Here are some sample layouts to consider:
- Whole Yard Perimeter: A single loop around your property gives your dog access to the entire yard.
- Waterfront Limited Water Access: If you have a lakefront property, submerge extra boundary wire into the lake, allowing your dog to access the water safely.
- Double Loop with Water Access: Use a double back around to create a three-sided fence boundary, incorporating the lake for added security.
By following these principles and carefully planning your layout, you can ensure a safe and effective dog fence installation.
Next, we will delve into choosing the right dog fence system, focusing on the transmitter, wire, area coverage, and special features.
Choosing the Right Dog Fence System
When it comes to setting up a dog fence installation, picking the right system is crucial. Let’s break it down into simple steps:
Purchase the Right System
Transmitter Power
The transmitter is the heart of your dog fence system. It sends signals through the boundary wire. Most basic systems cover up to 25 acres, but if you have a larger area, you’ll need a higher-powered transmitter. Make sure to choose one that matches your yard’s size.
Additional Wire
Basic kits typically come with 500 feet of wire, enough for about 1/3 of an acre. If you need more coverage, you’ll have to buy extra wire. For instance, enclosing a 1-acre yard requires roughly 1,200 feet of wire.
Correction Strength
Different dogs need different correction levels. Some systems offer collars with adjustable correction strengths. This is especially useful for stubborn dogs. Some collars even spray citronella to deter dogs from crossing the boundary.
Vet Consultation
Before installing your system, consult your vet. This is especially important if your dog has health issues. Vets can help determine if an electronic fence is safe for your pet.
Types of Dog Fences
Electric Fences
Electric dog fences use a buried wire to create a boundary. When the dog approaches, the collar emits a warning beep followed by a mild shock. These are great for creating custom shapes and large areas.
Invisible Fences
Invisible fences are similar to electric fences but are typically wireless. They create a circular boundary around the transmitter. These are easier to install but less customizable.
Wireless Fences
Wireless fences work with a central transmitter and GPS technology. They are easy to set up and portable, making them ideal for temporary situations or travel.
DIY Kits
DIY kits come with everything you need to set up your dog fence. They often include the transmitter, wire, and collar. These kits are cost-effective and allow you to customize the layout to your yard.
Choosing the right system involves considering your yard size, your dog’s behavior, and any special needs. With the right setup, you can ensure your dog’s safety and happiness.
Next, we will delve into the step-by-step dog fence installation process, focusing on tools, supplies, and testing.
Step-by-Step Dog Fence Installation
Install the Transmitter
First, choose an indoor location for your transmitter. A garage is ideal, but avoid places like barns or sheds to protect from moisture and weather damage. Keep the transmitter away from large appliances and breaker boxes to prevent interference.
Tools and Supplies:
- Transmitter
- Surge protector
- Grounded (three-prong) outlet
Outline and Lay Down Your Boundary
Next, outline your boundary using the boundary wire. Ensure it forms a continuous loop. If you need to run wires within the boundary to reach your transmitter, twist the wires together to negate the signal. This way, your dog can cross these wires safely.
Tips:
- Twist wires to cancel the signal where needed.
- Mark the boundary with flags for visibility during installation.
Connect and Test the System
After laying down the boundary wire, connect it to the transmitter. If you have additional wires, strip the ends and use wire connectors. Apply silicone caulk and wrap with electrical tape for extra protection.
Testing:
- Use the beep-only setting on the collar.
- Walk the perimeter holding the collar to ensure it beeps at the boundary.
- Check areas with twisted wires to confirm they are safe to cross.
Bury the Wiring
Bury the boundary wire about 3 inches deep, or as per the manufacturer’s instructions. If crossing driveways or paths, use a PVC pipe for protection.
Steps:
- Dig a shallow trench with a shovel.
- Place the wire inside and backfill with dirt.
- For asphalt or concrete crossings, use a masonry saw and patch the area after laying the wire.
Ground the System
Proper grounding is crucial to protect your system from lightning and power surges. Plug the transmitter into a grounded outlet or use a surge protector.
Tips:
- Follow the owner’s manual for grounding instructions.
- Test the system one final time after grounding to ensure everything works correctly.
By following these steps, you’ll have a reliable and safe dog fence install. Next, we’ll cover how to train your dog to understand and respect the new boundaries.
Training Your Dog
Initial Training
Training your dog to understand the new boundaries is crucial for an effective dog fence install. Here’s a simple step-by-step guide to get you started.
Training Flags: Most systems include white flags. Place these flags about 10 feet apart along the boundary. They serve as visual aids for both you and your dog.
Leash Training: Attach the receiver collar to your dog’s neck and use a leash. Lead your dog near the boundary so it can hear the warning beep from the collar. When the beep sounds, pull sharply on the leash and guide your dog back into the safe zone.
Reward System: Once your dog returns to the safe zone, command it to sit and stay. Reward it with a treat and lots of praise. This positive reinforcement helps your dog associate the safe zone with good things.
48-Hour Session: Dedicate a weekend to this initial training. Aim for hourly training sessions where your dog encounters the boundary and gets guided back.
Distractions: Use distractions like toys or people on the other side of the boundary to test your dog’s understanding. Ensure these distractions don’t call your dog’s name or give commands.
Boundary Awareness: By the end of the 48-hour period, your dog should start turning around on its own when it hears the warning beep. This indicates that the training is taking hold.
Advanced Training Tips
Persistent Dogs: Some dogs might test the boundaries more often. For these persistent dogs, consider stronger corrections or additional training sessions.
Stronger Corrections: If your dog frequently challenges the boundary, you might need to adjust the correction level on the collar. Always start at the lowest setting and gradually increase if necessary.
Citronella Spray: For dogs that are particularly stubborn, a citronella spray collar can be an effective deterrent. The spray is harmless but unpleasant, which can help reinforce the boundary.
Professional Help: If you’re struggling with training, don’t hesitate to seek professional help. A dog trainer can provide specialized techniques tailored to your dog’s behavior.
By following these training tips, you’ll ensure your dog understands and respects its new boundaries, making your dog fence install a success.
Frequently Asked Questions about Dog Fence Install
Can you install your own dog fence?
Yes, you can install your own dog fence! Many homeowners find that a DIY dog fence install is a cost-effective and rewarding project.
Tools Needed:
- Drill and driver bit
- Shovel
- Circular saw with a masonry blade
- Wire connectors
- PVC tape
- Silicone caulk
- Mini sledgehammer
- 3/4-inch PVC pipe
Ease of Installation:
If you’re handy, installing a dog fence can be straightforward. You’ll save on labor costs and have the satisfaction of completing the project yourself. However, if you’re unsure about your skills, hiring a professional might be safer, especially for complex layouts or difficult terrains.
How deep do you bury dog fence wire?
The trench for your dog fence wire should be only a few inches deep, typically 1-3 inches. This depth is enough to protect the wire from damage while ensuring it can still emit a strong signal.
Protection:
Burying the wire helps prevent it from becoming a trip hazard or getting caught in lawn equipment. For additional protection, especially under driveways or sidewalks, consider running the wire through PVC pipe.
Signal Strength:
Ensure the wire is not too close to metal objects like chain link fences or metal poles, as these can interfere with the signal. Keeping the wire at least several feet away from other buried wires (electrical, TV, phone) is also crucial.
How to install an invisible dog fence?
Transmitter Installation:
Mount the transmitter indoors, ideally in a garage or weatherproof outbuilding. It should be close to an electrical outlet but away from major appliances to avoid interference. Use a surge protector to safeguard against lightning strikes.
Boundary Setting:
Lay out the boundary wire on the ground, starting from the transmitter and looping back to it. Avoid sharp corners to prevent signal interference. If needed, create sub-loops to protect specific areas like gardens.
Wire Connection:
Connect the boundary wire to the transmitter. If you need to cross paths or driveways, run the wire through PVC tubing for added protection.
Before burying the wire, test the system. Set the collar to beep-only mode and walk it around the boundary to ensure it activates correctly. Adjust the boundary width on the transmitter if necessary.
By following these steps, you can successfully install an invisible dog fence that keeps your pet safe while giving them the freedom to roam your yard.
Conclusion
Installing a dog fence can be a rewarding DIY project that ensures your pet’s safety while giving them the freedom to enjoy your yard. With careful planning, the right tools, and proper training, you can create a secure environment for your furry friend.
Summary
We’ve walked you through the steps of planning, choosing, and installing a dog fence. From marking utilities to testing the collar, each step is crucial for a successful installation. Remember to pay attention to details like trench depth and grounding to ensure your system works effectively.
Benefits
A well-installed dog fence offers numerous benefits:
- Safety: Keeps your dog within a designated area, preventing them from running into dangerous zones like roads.
- Freedom: Allows your dog to roam freely within the safe perimeter.
- Peace of Mind: Reduces the worry of your dog escaping or encountering wild animals.
- Customization: You can create ‘no-go’ zones within your yard to protect gardens or other sensitive areas.
Pet Playgrounds
At Pet Playgrounds, we offer versatile and durable dog fence systems designed to meet your specific needs. Our fences are easy to install, require no specialized tools, and can be reconfigured as your needs change. We also provide expert advice and support to ensure your installation goes smoothly.
Final Tips
- Test Before You Bury: Always test the system before burying the wire to ensure it works correctly.
- Training is Key: Proper training ensures your dog understands and respects the boundary.
- Regular Checks: Periodically inspect the fence and collar to ensure they are in good working condition.
- Consult Experts: If you have any doubts or face unique challenges, don’t hesitate to consult professionals.
By following these guidelines and utilizing the resources at Pet Playgrounds, you can create a safe and enjoyable space for your dog. Happy fencing!
For more information and expert advice, visit our installation page.
